Removal Procedures; Cover Removals - Lexmark E32x Service Manual

4500–32x

Removal Procedures

moval Procedures
Be sure to unplug the power cord whenever you are working on the
printer with one of the covers removed. Be sure to remove the print
cartridge before you perform removal procedures.
Cover Removals s
Access Cover
1. Open the front access cover.
2. Press the center of the access cover down to release the side
pivot points.
3. Remove the access cover.
Front Cover
1. Open the front cover.
2. Remove the two plastic clips from the front cover support arm
hinges.
Note: Support and ease the charge roll assembly into a resting
position when disengaging the front cover support arm hinges.
3. Disengage the front cover support arm hinges from the charge
roll assembly.
4. Release the front cover from its pivot points.
Note: Lay the front cover to one side as the operator panel cable is
attached to the controller board. See
page 4-3 and
more information.
Top Cover
1. Open the front cover.
2. Remove the two top cover screws.
3. Remove the top cover.
4-2
Service Manual
dures
"Controller Board Cage Removal" on page 4-4
bly into a resting
See "Right Side Cover ht Side Cover" on
for