2N Helios IP Vario Installation Manual page 26

Power
adapter
+
91341481E
–
El. lock
+
932070E
932080E
932090E
Additional lock
connector
Figure 2.13 Description of 2N
Terminal Block X2 Connection
Terminal block X2 includes 10 terminals whose functions are distinguished by colour.
Terminals 5–10 are used for connecting 2N
3–4 are designed for connecting the electric lock and terminals 1–2 help connect an
external 12V / 2A DC power supply if no PoE power supply is available.
1. The terminal block is included in the package. To adjust an already installed
®
2N
remove the terminal block from the printed circuit board.
2. Insert the wires under the respective terminals.
3. Tighten the terminals using a flat screwdriver.
4. Replace the terminal block to the printed circuit board.
Mounting – Electrical Installation
Terminal block
12V / 2A DC
+
+
RFID Card reader
connector
®
Helios Vario IP Connectors, PCB Version 535v5
Helios IP Vario, disconnect it IP from the power supply. Then pull to
Configuration connector
Speaker
connector
Microphone
connector
®
Helios IP Vario to the Ethernet. Terminals
2.3
Display
connector
Camera
connector
Connector for
extending modules
26