Comtech EF Data MBT-4000B Installation And Operation Manual page 55

Multi-Band Transceiver System
Remote Command
Bias Tee Mute MSP=x MBT
State
1 byte, Command or Query.
value of 0,1 Mute the unit, where:
0 = Disabled,
1 = Enabled
Example: MSP=1 would mute the LNB bias tee
Revision 0
MN/MBT4000B.IOM
MSP= (message ok)
MSP? (received ok, but
invalid arguments
found)
MSP* (message ok, but
not permitted in current
mode)
MSP! (Command not
accepted by BUC or
BDC sub-units. It must
be addressed to the
MBT-4000B base unit )
A-19
MSP? MSP=x
(same format
as command
arguments)