Follett Symphony 110 Series Installation & Service Manual page 22

All units
9. Slip supplied hose clamp onto tube and push tube onto exit port of evaporator.
Do not twist hose when securing to evaporator.
! Only use tubing supplied by Follett Corporation.
10. Fasten tube on port with hose clamp, being sure that clamp is positioned on evaporator side of nozzle fl ange.
11. Tighten clamp.
ice level control stat
engaging pin
1"
(26mm)
ice tube
ice hose mounting bracket
3/16 (5mm) ice tube hole
22