Multihandset Features - Uniden XDECT 8115 Series Owner's Manual

Multihandset Features

# To use the features in this section, you need at least 2 handsets.
Your base supports a total of 12 cordless handsets: the one that came with
the base and up to 9 accessory handsets.
You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
Handsets that aren't registered display a Not Registered message. For
registration instructions, see page 30 or see the accessory handset
manual.
If a handset was ever registered to a base, you must reset it before it can
register to a new base; see page 30, or see the accessory handset manual.
Conference Calling (Line 1)
• When an outside call comes in on the land line or the via a mobile, two
handsets and the base can join in a conference call with the outside
caller.
• To join a call that's already in progress, just press
join a Landline call) or MOBILE (to join a Mobile call).
• To leave the conference call, hang up normally; the other handset
remains connected to the call.
Conference Calling (Line 2)
A landline call and a mobile call can be connected in conference using the
Line Conference feature.
• When an outside call comes in on the land line and then another
outside call via a mobile, two handsets can join in a conference call with
the outside callers (4-way conference).
• To conference the second outside call, press
select Conference.
• To join a call that's already in progress, just press
.
SPEAkER
• To leave the conference call, hang up normally; the other handset
remains connected to the call.
30
HOME / FLASH
and then
MENU/SELECT
HOME/FLASH
(to
or