3. After the selected number of hours, the phone automatically exits silent
mode. To exit silent mode manually, press and hold
#
If the phone is in silent mode and you turn off the answering
system, the phone exits silent mode.
Multihandset Features
#
To use the features in this section, you need at least 2 handsets.
• Your base supports a total of 12 cordless handsets: the one that came
with the base and up to 11 DCX180 accessory handsets. Your base also
supports a total of 2 DRX100 range extenders, including any that came
with your phone. If you have any DWX handsets, the D1880 is limited to
a total of 6 accessory handsets
• You must register accessory handsets to the base before using them.
(Handsets that came packaged with the base are already registered.)
• Handsets that aren't registered display a Not Registered message.
For registration instructions, see page 19, or see the accessory handset
manual.
• If a handset was ever registered to a base, you must reset it before it can
register to a new base; see page 19, or see the accessory handset manual.
Conference Calling
• When an outside call comes in, two handsets can join in a conference
call with the outside caller.
• To join a call that's already in progress, just press
• To leave the conference call, hang up normally; the other handset
remains connected to the call.
Call Transfer
To...
transfer a call
cancel a transfer
accept a
transferred call
12 - English
Press...
. The phone puts the call on hold and
inTErcoM/clEar
prompts you to select the handset you want to page.
When the other handset accepts the call, you'll be
disconnected (press
to return to the call.
Talk/flash
to answer the page and speak to the other
inTErcoM/clEar
handset. Then, press
# again.
Talk/flash
to rejoin the call).
Talk/flash
to speak to the caller.
Talk/flash
or
.
sPEakEr