Daily Maintenance - TurboChef ngo Service Manual

Daily Maintenance

Follow the steps below when cleaning your NGO
oven. Use only TurboChef ®-approved cleaning
chemicals. The use of any other cleaning products
may damage critical oven components, resulting in a
non-warranty service call.
Step 1
Step 2 (Fig A)
Step 2 (Fig B)
Step 4
Step 5
Step 1: Prepare the Oven
WARNING: The oven operates at approximately 525°F (274°C) and may
cause injury if not allowed to cool properly.
oven displays oven off: ready to clean.
Step 2: Remove the Wire Rack and Lower Jetplate
WARNING: Be sure the oven interior is cool before removing these items.
CAUTION: Do not force the rack out by pulling upward. Forcefully
dislodging the rack could cause the top ceramic jetplate to break.
CAUTION: DO NOT remove the top ceramic jetplate; breakage will result in
a non-warranty service call.
Step 3: Clean the Wire Rack and Lower Jetplate
Step 4: Clean the Air Filter
CAUTION: TurboChef does not recognize blocked air vents as a warrantable
claim. The filter must be cleaned regularly or replaced if damaged. During oven
operation, the filter must remain in place at all times.
CAUTION: DO NOT operate the oven without the air filter in place.
Step 5: Wipe the Oven Interior
Continued on page 6.
Supplies and Equipment
TurboChef ® Oven Cleaner (Product Number:
103180), TurboChef ® Oven Guard (Product Number:
103181, optional for easier maintenance), Kay Click-
San® sanitizer, nylon scrub pad, cleaning towel, dispos-
able gloves, protective eyewear, dust mask (optional)
DO NOT clean the oven until the
5