Replacing Items - Removing Outer Shell Required - TurboChef ngo Service Manual

A-4 APPENDIX - REPLACING OVEN COMPONENTS
Replacing Items - Removing Outer Shell Required (Figures A-4 through A-16)
DANGER: Before replacing any oven component, ensure the oven is removed from any power
source. Replacing a component while the oven is plugged in can result in serious injury or death
CAUTION: Be careful to not tear the insulation when servicing components. Always reinstall the
insulation properly before reinstalling the outer shell.
NOTE: Fasteners listed are required for installing component to oven.
x3 8
5
Ethernet cable
3
port location
Figure A-4: Outer Shell Removed - Left Side
See Figs A-6 and A-7
Figure A-6: Outer Shell Removed - Right Side
2
1
15
13
7
15
5
Figure A-5: Outer Shell Removed - Left Side
Location only;
19
part not shown
14
4
10 x2
See Figure A-10, page A-8 for
Primary switch detail
Single Magnetron Sota
11