Completing The Voip Settings - Gigaset A580 IP User Manual

Completing the VoIP settings

After the entries have been completed, the handset reverts to idle status.
If all the settings are correct and if the phone can establish a connection to the VoIP
server, the internal name of the handset will be displayed: (example)
Ð
INT 1
Þ
You can now use your phone to make calls via the fixed line network and
the Internet! Callers can reach you on your fixed line number and your
VoIP number.
Please note
u
To ensure that you can always be reached via the Internet, the router must be
permanently connected to the Internet.
u
If you have launched the connection assistant via the menu, you will initially
have to press and hold the end call key
handset to return to idle status.
u
If you try to make a call via a VoIP connection that is not configured correctly,
the following VoIP status message will appear in the display: VoIP config. error:
xxx (xxx = VoIP status code). The various status codes and their respective
meanings can be found in the appendix on
You have set up several VoIP accounts ...
You can enter up to five additional VoIP accounts (VoIP phone numbers) via the
Web configurator at a later stage (
work number and the Gigaset.net number, your phone can then be reached via up
to eight different phone numbers. You can assign the phone numbers to the indi-
vidual handsets that are registered with the base station as send and receive num-
£
bers ( Page 126).
V
Menu
a
£
Page 110). Together with your fixed line net-
once the entry is complete, for the
Page 154.
First steps
27