Assigning Send And Receive Numbers To Handsets - Gigaset A580 IP User Manual

Web configurator – Setting the phone using a PC

Assigning send and receive numbers to handsets

You can assign up to eight phone numbers to your phone: your fixed line network
number, your Gigaset.net number and up to six VoIP numbers.
You can assign as many of these numbers as you like to each handset as receive
numbers. Receive numbers determine which handset(s) will ring when a call is
received.
You can assign one of your VoIP numbers to each handset as a (VoIP) send number.
Send numbers define which VoIP account should be used in general to make and
pay for outgoing VoIP calls. Exceptions:
u
a phone number is dialled with a line suffix (
u
a dialling plan has been defined for the phone number (
The Gigaset.net number and fixed line network number are permanently assigned
to each registered handset as send numbers.
Please note
A handset is assigned the following numbers after it is registered on the
base station:
u
Receive numbers: all phone numbers assigned to the phone (fixed line
network, Gigaset.net and VoIP).
u
Send numbers: the fixed line network number and the VoIP phone number that
you entered at the start of the phone configuration.
¤
Open the following Web page: Settings
ment.
The display shows all registered handsets. A list is displayed for each handset show-
ing the phone numbers that are configured and activated for the phone. The con-
nection names are shown in the Connections column. The fixed line network con-
nection is always at the end of the list.
¤
Define a VoIP phone number as the send number for each handset. To do this,
click the option following the phone number in the for outgoing calls column.
The previous assignment will automatically be deactivated.
Please note
The fixed line network number is permanently assigned to each handset as a send
number. This assignment cannot be deactivated. It ensures that emergency num-
bers can be called from every handset.
The Gigaset.net number is also permanently assigned to each handset as a send
number.
¤
Select the phone numbers for each handset (fixed line network, VoIP) that are to
be assigned to the handset as receive numbers. To do this, click the option fol-
lowing the phone number in the for incoming calls column. Every handset can
be assigned several phone numbers or no phone number (
¤
Now select Set to save your settings.
126
£
Page 111) or
£
Page
¢ ¢
Telephony Number Assign-
128).
= assigned).