Table of Contents
Advertisement
Updating the base station
firmware
If necessary, you can update your base
station firmware.
The firmware update is downloaded by
default directly from the Internet. The rel-
evant website is preconfigured in your
phone.
Please note:
For the following firmware updates, you can
use the Web configurator to specify a local PC
from which the firmware should be down-
loaded to the phone (page 51).
Precondition:
The base station is in idle status, i.e.:
u
No calls are being made via the fixed
network or VoIP.
u
There is no connection between regis-
tered handsets or to GHC devices.
u
The phone's Web configurator is not
connected to a PC.
u
The base station menu is not open in
any of the handsets.
Starting firmware update
¢
¢
Settings
§Menu§
Update
~
Enter base station system PIN
(default setting: 0000).
The base station establishes a connection
to the Internet or to the local PC.
Press the display key to start
§Yes§
the firmware update.
Please note:
– If the update is carried out from the Inter-
net, a check is made to ensure that there is
not a more recent version of the firmware
available. If this is not the case, the opera-
tion is terminated and a message is issued
to that effect.
– If an error occurs while firmware is being
updated from a local PC, the most recent
version of the firmware is automatically
downloaded from the Internet.
¢
Base
Firmware
Making VoIP settings
In order to be able to use VoIP, you must
set a few parameters for your base station.
You can set all parameters easily via a PC
connected to your network (see page 43).
Using the connection wizard
The connection wizard starts automati-
cally the first time your handset and base
station are used. You can also start the
connection wizard via the menu:
¢
¢
Settings
§Menu§
(enter system PIN)
Configuration
¢
Connection Assistant
For how to enter VoIP settings using the
connection wizard, see page 10.
Changing settings without the
connection wizard
You can change your provider's VoIP set-
tings and the VoIP user data via the menu
without starting the connection wizard.
Downloading your VoIP provider's
settings
The general settings for various VoIP pro-
viders are available for download on the
Internet. The relevant website is precon-
figured in your phone.
¢
¢
Settings
§Menu§
Configuration
(enter system PIN)
¢
Select VoIP Provider
The phone establishes a con-
nection to the Internet.
q
Select country and press
q
Select VoIP provider and press
.
§OK§
Your VoIP provider data is downloaded
and saved in your phone.
Making VoIP settings
¢
Base
VoIP
¢
Base
VoIP
§OK§
.
39
Advertisement
Table of Contents
Troubleshooting
