Gigaset A580 IP User Manual page 116

Area: Personal Provider Data
Enter the configuration data that is required to access your VoIP provider's SIP serv-
ice. This data can be obtained from your VoIP provider.
The field names in this area (Authentication Name etc.) listed in the following are
standard names and may change. If you have already downloaded the provider's
general details ("Select VoIP Provider" button, see above), field entries will be
replaced by provider-specific names to facilitate orientation (e.g. SIP-ID instead of
Authentication Name).
Authentication Name
Specify the registration or authentication ID agreed with your VoIP provider (maxi-
mum 32 digits). The registration ID serves as the access ID that your phone must
specify when registering with the SIP proxy/registrar server. The Authentication
Name is usually identical to the Username, i.e. to your Internet phone number.
Authentication password
Enter the password that you have agreed with your VoIP provider in the Authenti-
cation password field (maximum 32 characters). The phone needs the password
when registering with the SIP proxy/registrar server.
Username
Enter the caller ID for your VoIP provider account (maximum 32 characters). This ID
is usually identical to the first part of your SIP address (URI, your Internet phone
number).
Example
Example: If your SIP address is "987654321@provider.com", enter "987654321" as
the Username.
Display name (optional)
Enter any name that should be shown in the other caller's display when you call
them via the Internet (example: Anna Sand). All characters in the UTF8 character set
(Unicode) are permitted. The name must not exceed 32 characters.
If you do not enter a name, your Username or your VoIP phone number will be dis-
played.
Ask your VoIP provider if this feature is supported.
Web configurator – Setting the phone using a PC
115