Permobil Chairman 2k Service Manual page 14

Magnetic wheel lock
Fitting
1. Using the adjustment screws, adjust the
setting of the magnetic wheel lock as per the
instructions on the back side of the magnetic
wheel lock, see fig. 22.
2. Place the wheel lock disc on the magnetic
wheel lock.
3. Put the lock onto the motor.
Fig. 22. The wheel lock setting
is adjusted using the two
adjustment screws.
Fig. 23. Magnetic wheel lock, wheel lock disk,
cover and rubber seal dismounted.
Fig. 24. Magnetic wheel lock, wheel lock
disk and cover mounted.
14