Seat Elevator Cables; Seat Lift Cable - Permobil Chairman 2k Service Manual

Seat lift cable

Seat lift cable
Removing
1. Remove the seat lift; follow the instructions on
page 18.
2. Remove the seat lift sensors. Note the position
of the sensors for refitting, see fig. 40-41.
Fitting
Fitting is the reverse procedure.
1 2 3
1. Screw
2. Lever switch plate
3. Lever switch
4. Insulating plate
5. Seat lift
6. Star washer
7. Nut
2 4 5 6 7
Fig. 41. Attachment of the sensors to the seat lift.
Fig. 40. Attachment of the
sensors to the seat lift.
20