JRC JHS-180 Instruction Manual page 55

"TX Power"
The cursor appears in the "TX Power" field.
Pressing up-arrow key or down-arrow key inputs the "TX power" detail from "High" or "Low"
Pressing [ALM/CLR] quits the inputting and returns to the "Channel Management" setting menu.
Pressing [ENT] entries the inputted detail and returns to the "Channel Management" setting
menu.
"Zone Size"
The cursor appears in the "Zone Size" field.
Pressing numerical keys inputs value of the "Zone Size" .
The value can be input "1" as minimum and "8" as maximum.
Pressing [ALM/CLR] quits the inputting and returns to the "Channel Management" setting menu.
Pressing [ENT] entries the inputted value and moves the cursor to the next field.
"Northeast" corner and "Southwest" corner of the Area
The cursor appears in the "Area(NE)"/"Area(SW)".
Pressing up-arrow key or down-arrow key inputs "N" or "S" and "E" or "W".
Pressing numerical keys inputs the value of the latitude / longitude.
Pressing [ALM/CLR] quits the inputting and returns to the "Channel Management" setting menu.
Pressing [ENT] entries the inputted value and moves the cursor to the next field.
5-29