Download Print this page

JRC JHS-180 Instruction Manual: Waypoints

Automatic identification system.
Hide thumbs

Advertisement

5.3.2.4 Waypoints

"Waypoint" can be displayed by pressing [4] in the "Destination" Setting menu.
Fourteen waypoints can be set as maximum.
Twenty letters can be set as waypoint name.
Waypoint List
WAYPOINTS         UTC11 : 43
 BRG : RANGE   NAME/MMSI
 270°: 0.18NM JRC MARU1
  35°: 0.29NM JRC MARU2
  22°: 0.92NM JRC MARU1
 1.   N 36°50 110
      E135°30 210    DEL>
  NAME:EAST POINT1
 2.   N 36°50 110
      E136°40 110    INS>
 NAME:EAST POINT2
 3.   N 36°10 110
      E120°10 111REVERSE>
↓NAME:EAST POINT3
Pressing up-arrow key or down-arrow key selects the waypoint.
Pressing [ALM/CLR] returns to the "Destination" Setting menu.
Pressing [ENT] confirms the selected waypoint to edit.
Editing of Waypoint
The cursor appears in the latitude field.
(1) Latitude field and longitude
Pressing up-arrow key or down-arrow key selects "N" or "S" and "E" or "W".
Pressing numerical keys inputs the value.
Pressing right-arrow key or left-arrow key moves the cursor.
Pressing [ALM/CLR] quits the inputting data and returns to "Waypoint List".
Pressing [ENT] entries the inputted data and moves the cursor to next field.
(2) Waypoint name
Keypad appears in the display.
Pressing arrow keys move the cursor on the keypad in the display.
Pressing [ENT] input one letter from the keypad to the "Waypoint Name" except following cursor
position.
Pressing [ENT] at the next cursor position of "9" on the keypad close the keypad.
Pressing [ENT] at the arrow position on the keypad moves the cursor in the "Waypoint Name".
Pressing [ALM/CLR] deletes one letter on the cursor in the "Waypoint Text".
5-20
  
Pressing this select key deletes the selected
waypoint.
Pressing this select key inserts a new waypoint
before the selected waypoint to edit.
Pressing this select key switches order of
display in order to lower number or higher
number.

Advertisement

   Also See for JRC JHS-180

   Related Manuals for JRC JHS-180

Comments to this Manuals

Symbols: 0
Latest comments: