Download Print this page

JRC JHS-180 Instruction Manual: Trx Condition Log Display

Automatic identification system.
Hide thumbs

Advertisement

5.3.7.1 TRX Condition log display

"TRX Condition" log display can be displayed by pressing [1] in the "Maintenance" menu.
Latest condition is displayed as "1" (Operating condition).
("TRX Condition" log display)
TRX CONDITION     UTC11:43
 BRG : RANGE   NAME/MMSI
 270°: 0.18NM JRC MARU1
  35°: 0.29NM JRC MARU2
  22°: 0.92NM JRC MARU1
1.CH A:2087 DEFAULT TX/RX
  CH B:2088 NARROW     RX
  TX POWER :HIGH
  ZONE SIZE:5nm
  AREA N: 35°33.387'
  (NE) E:139°54.578'
  AREA N: 35°33.387'
↓ (SW) E:139°54.578'
2.CH A:2087 DEFAULT TX/RX
  CH B:2088 NARROW     RX
  TX POWER :HIGH
  ZONE SIZE:5nm
  AREA N: 35°33.387'
  (NE) E:139°54.578'
  AREA N: 35°33.387'
↓ (SW) E:139°54.578'
Pressing up-arrow key or down-arrow key scrolls the display.
Pressing [ALM/CLR] returns to "Mailtenance" menu.
"Channel A and B" number
Bandwidth ("Wide" / "Narrow")
TRX mode ("TX/RX" / "RX")
"TX Power" ("HIGH" / "LOW")
"Zone Size"
"Northeast Corner of the Area"
"Southwest Corner of the Area".
(When channel management operation)
5-35

Advertisement

   Also See for JRC JHS-180

   Related Manuals for JRC JHS-180

Comments to this Manuals

Symbols: 0
Latest comments: