Download Print this page

JRC JHS-180 Instruction Manual: Channel Management Setting

Automatic identification system.
Hide thumbs

Advertisement

5.3.6.2 Channel Management Setting

"Channel Management" setting menu can be displayed by pressing [2] in the "Set Up" menu.
Eight channel management settings can be memorized in the transponder as maximum.
("Channel Management" setting menu)
CH MANAGEMENT     UTC11:43
 BRG : RANGE   NAME/MMSI
 270°: 0.18NM JRC MARU1
  35°: 0.29NM JRC MARU2
  22°: 0.92NM JRC MARU1
1.CH A:2087 WIDE   TX/RX
2.CH B:2088 NARROW    RX
3.TX POWER :HIGH
4.ZONE SIZE:5nm
5.AREA N 35°33.3870' CHECK>
  (NE) E139°54.5780'
6.AREA N 35°33.3870'
  (SW) E139°54.5780'  LIST>
Pressing up-arrow key or down-arrow key selects the sub menu.
Pressing [ENT] moves the cursor to the selected sub menu field.
Pressing numerical key [1] – [6] selects the sub menu and moves the cursor to the selected sub
menu field.
Pressing [ALM/CLR] returns to "Set Up" menu.
(1) Inputting of the Channel Management
"CH A"
The cursor appears in the "CH A" field.
Pressing numerical keys inputs the channel A number.
Pressing up-arrow key or down-arrow key selects the detail.
("WIDE" or "NALLOW", "TX/RX" or "RX")
Pressing [ALM/CLR] quits the inputting and returns to the "Channel Management" setting menu.
Pressing [ENT] entries the inputted number or detail and moves the cursor to the next field.
"CH B"
The cursor appears in the "CH B" field.
Pressing numerical keys inputs the channel B number.
Pressing up-arrow key or down-arrow key selects the detail.
("WIDE" or "NALLOW", "TX/RX" or "RX")
Pressing [ALM/CLR] quits the inputting and returns to the "Channel Management" setting menu.
Pressing [ENT] entries the inputted number or detail and moves the cursor to the next field.
5-28
Pressing this select key checks whether or not
the
inputted
detail
transponder.
Pressing this select key displays the channel
management setting of the transponder.
can
be
set
to
the

Advertisement

   Also See for JRC JHS-180

   Related Manuals for JRC JHS-180

Comments to this Manuals

Symbols: 0
Latest comments: