Serial Port Profile (Master)
Serial Port Profile (Master)
1. Read the bar code below to configure the reader in Serial Port Profile (Master) mode.
2. Create a label to link the reader to the PC Bluetooth connection. The label must be Code
3. Open the BlueSoleil program and use the reader to scan the label you created above to
70
128 symbology and contain the PC Bluetooth address with the following formatting:
The address is usually shown in the Hardware tab of the My Device Properties win-
dow.
The label should look similar to this example:
Linking Label Demo in Serial Port Profile (Master)
initiate the connection with the PC.
Serial Port Profile (Master)
$+QS<12hex characters>$-
PowerScan™ BT8300