HID Profile
5. The next window will display a PIN Code to be used for the connection. A beep will be
6. Wait as the Bluetooth device connects to the reader.
60
sounded, which indicates the reader is waiting for an alpha-numeric entry.
There are two ways to enter the PIN Code using the reader:
a. Keypad (for PowerScan BT8300 16-key only): type the PIN Code on the reader's
keypad, ending with the Enter key.
b. Scanning: Using the reader, scan the bar codes from the
this guide, corresponding with the required PIN Code digits, then scan the Exit
and Save configuration label.
Numeric Keypad
section of
PowerScan™ BT8300