Serial Port Profile (Master) - Datalogic PowerScan BT8300 Family Manual

Serial Port Profile (Master)

Serial Port Profile (Master)
Read the bar code below to configure the reader in Serial Port Profile (Master) mode.
1. Create a label to link the reader to the PC Bluetooth connection. The label must be Code
2. Open the Bluetooth Devices program in the Control Panel (or in the system tray).
8
128 symbology and contain the PC Bluetooth address with following formatting:
The address is usually shown in the Hardware tab of the Bluetooth Devices window. The
label should look similar to this example:
Linking Label Demo in Serial Port Profile (Master)
Select the COM Ports tab and click Add.
Serial Port Profile (Master)
$+QS<12hex characters>$-
PowerScan™ BT8300