Datalogic PowerScan BT8300 Family Manual page 82

HID Profile
8. A pop-up window will show a PIN Code required for the connection. The reader will
9. There are two ways to enter the PIN Code using the reader:
10. Four ascending beeps will be emitted, signaling that the reader has been successfully con-
11. Now the user can read bar code labels and verify that the data appears in the PC's Termi-
78
emit a beep indicating that it is waiting for input.
a. Keypad (for PowerScan BT8300 16-key only): Type the PIN Code on the reader's
keypad, ending with the Enter key.
b. Scanning: Using the reader, scan the bar codes from the
this guide, corresponding with the required PIN Code digits, then scan the Exit
and Save configuration label.
nected to the Bluetooth-enabled PC.
nal window.
Numeric Keypad section of
PowerScan™ BT8300