Datalogic PowerScan BT8300 Family Manual page 91

7. Select the reader you want to connect. A pop-up window will show a PIN Code required
8. There are two ways to enter the PIN Code using the reader:
9. Four ascending beeps will be emitted, signaling that the reader has been successfully con-
Initial Bluetooth® Connection Guide
for the connection. The reader will emit a beep indicating it is waiting for input of the
PIN Code.
a. Keypad (for PowerScan BT8300 16-key only): Type the PIN Code on the reader's
keypad, ending with the Enter key.
b. Scanning: Using the reader, scan the bar codes from the
this guide, corresponding with the required PIN Code digits, then scan the Exit
and Save configuration label.
nected to the Bluetooth-enabled PC.
HID Profile
Numeric Keypad
section of
87