Panasonic CZ-256ESMC2 Operation Manual page 59

When a mail test is sent, the window below appears when the mail settings have been changed.
In this case, either click the "Send" button to enable the mail setting changes or click the "Cancel" button
to disable the changes, and then send the mail test again.
If the Intelligent Controller unit is processing (check configuration, cut-off, backup, etc.), this screen
cannot be displayed or updated, mail test cannot be sent, and setting change "Send" cannot be
performed.
If the Intelligent Controller unit is displaying the initial setting screen (main menu 5) or the Settings screen
(main menu 6), setting change "Send" cannot be performed. In either case, the following window
appears.
3-10-1. Server details
When you click the "Server details" button from the [WEB settings] screen, a screen such as shown
below appears.
For details on the settings, refer to the operation manual for the Intelligent Controller.
16
Screen Display and Operation
Input values have the following restrictions.
3-10-1-1. Receiving server settings
When you click the "Receiving server settings" button from the [Server details] screen, a screen such as
shown below appears.
For details on the settings, refer to the operation manual for the Intelligent Controller.
Input values have the following restrictions.
To [3-10-1-1 Receiving
server settings] screen
Setting Item Input Range
Port number Numbers 0 to 999999
User ID Up to 50 alphanumeric
Password characters and symbols
Setting Item Input Range
Recv. server address Up to 40 alphanumeric characters
(POP3) and symbols
User ID Up to 50 alphanumeric characters
and symbols
Password
Port number Numbers 0 to 999999
17
Screen Display and Operation
Input Character Limitations
Input Character Limitations
Symbols are "@" "." "_" ":" only