Setting Tenant Holiday/Timer Special Day; Main; Prohibiting Remote Control Use - Panasonic CZ-256ESMC2 Operation Manual

6 Using the System

6.8.4 Setting Tenant holiday/Timer special day

You can make settings by tenant of days of setting timer for holidays and timer special days.
Holidays and timer special days can be registered for up to the next two years.
Procedure
Select 6.Auxiliary settings in the main menu and 4.Ten.Ho/Timer Sp. Day in the sub menu.
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
1.Status/Control 6.Distribution time zone
2.Total data/Cut-off
7.Special distrib. day
3.Distrib. ratio/Usage
8.I/D unit settings
4.Maintenance/Test Run
9.Other settings
5.Initial settings 10.WEB settings
6.Auxiliary settings 11.User settings
4
2
1
1 Select the tenant.
2 Select the calendar for the month of the year to set.
3 Select items (regular days, holidays, and special days 1 to 5) you would like to set.
4 Point the item (regular days, holidays, and special days 1 to 5) you would like to set on the left
calendar and touch the date or day of the week.
5 If holidays and timer special days have already been
registered for a tenant, you can copy them from the calendar
to the calendar on the right. Select the tenant for the copy
destination calendar.
6 A window like the one on the right appears when you touch
Copy .
7 Touch the OK button to copy two years of holidays from the
tenant on the left to the tenant on the right.
* Set the system mode at "Regular day" to cancel settings of
holidays and timer special days.
60
6 4
6 4
6 Using the System

Main

Sub

6.8.5 Prohibiting remote control use

You can prohibit the use of the remote controls connected to indoor units.
Procedure
Select 6.Auxiliary settings in the main menu and 5.Prohibit R/C in the sub menu.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
6.Auxiliary settings
3
5
6
1
1 Touch the item you want to change to display a settings window for that item.
2 To allow remote control use, touch the O (Accept) button. To prohibit remote control use, touch
the X (Prohibition) button.
3 Touch the Set button to con rm the setting, or the Cancel button to cancel it.
4 Touch the Initial setting button to restore the initial setting (described above).
1.Zone name
2.ZoneNo./Mng.target
3.Program timer
4.Ten.Ho/TimerSp.Day
5.Prohibit R/C
6.Distribution time zone
7.Special distrib. day
8.I/D unit settings
9.Other settings
10.WEB settings
11.User settings
61
6 5
6 5
Main Sub
2
3
4