Displaying And Operating All Indoor Units; Main; Total Data And Manual Cut-Off Processing; Displaying Total Data By Indoor Unit - Panasonic CZ-256ESMC2 Operation Manual

6 Using the System

6.4.5 Displaying and operating all indoor units

Use this screen to display information about the state of all indoor units and to operate all indoor
units at once.
Procedure
Select 1.Status/Control in the main menu and 5.All units in the sub menu.
One screen displays up to 100 indoor units in order of their tenant. The units can be operated
individually or all at once.
1 When you touch a unit name, a remote control window for individual operations appears.
2 When you touch All units , a remote control window for operating all connected units appears.
1.Status/Control
1.Each tenant
2.Total data/Cut-off
3.Distrib. ratio/Usage 2.Each tenant details
4.Maintenance/Test Run 3.Each zone
4.Each zone details
5.Initial settings
6.Auxiliary settings 5.All units
1
The rst four characters are displayed for unit names.
38
5
1 1 5
6 Using the System

Main

Sub

6.5 Total Data and Manual Cut-Off Processing

6.5.1 Displaying total data by indoor unit

Use this screen to check total data such as the operating time and the number of operations for
each indoor unit.
Procedure
Select 2.Total data/Cut-off in the main menu and 1.Each I/D unit in the sub menu.
1 Selects the tenant to display.
2 Selects either the current or the past (maximum 24 months) cut-off data.
3 Selects the time zone to display.
* This button will be invalid when setting the mode at "No Distrib.". (see
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
5.Initial settings
2
6.Auxiliary settings
1
4 If you want to display operating time by fan speed, touch Operating time . The display changes
as shown below.
5 5 1
1
Main Sub )
1.Each I/D unit
2.Each tenant 1.All hours
3.Each O/D unit 2.Regular hours
3
3.Out of hours
4.Pulse meter
5.Cut-off/Data backup 4.Special Day
2
39
2 1
2 1
Main Sub
4