Supplementary Information - Panasonic CZ-256ESMC2 Operation Manual

4. Supplementary Information

When connecting the Intelligent Controller via Internet, consider implementing network security
measures, such as a firewall.
Error Messages
Error Cause
The system configuration
System configuration change!
of the Intelligent
(when logged in with Administrator
Controller has changed.
privileges)
Intelligent Controller is now The Intelligent Controller
processing, please wait. is applying settings.
Please try later. Access from the Web is
heavy.
The Intelligent Controller
Communication error
was turned off
connected, or a cable
was unplugged or the
network failure.
Invalid user ID The entered user ID is
different from the user ID
registered on
Intelligent Controller.
Wrong password The entered password is
different from
password registered on
the Intelligent Controller.
All Stop! The external all stop input
is switched on for the
All units were forced to stop.
Intelligent Controller unit.
Do not operate until unit operation
resumes.
18
Screen Display and Operation
Remedy
This is a warning message.
Wait a moment and resume
operation.
If configuring settings with the
Intelligent Controller, switch to a
non-settings screen (such as screen
1-n).
Wait a moment and resume
operation.
Try the operation again.
while
Verify that the Intelligent Controller is
turned on, and that the network wiring
connections are correct.
Verify the user ID that was registered
to the Intelligent Controller.
the
Verify the password that was
the registered to the Intelligent Controller.
When the external all stop input is
changed to OFF, the message
disappears. After changing to OFF,
wait for the message to disappear.