Log-In; Screen Display And Operation; Each Tenant] Screen - Panasonic CZ-256ESMC2 Operation Manual

3. Screen Display and Operation

3-1. [Each Tenant] Screen

After you log in to the Intelligent Controller, or when you use the menu to select [1. Status/Control :
1. Each tenant], a screen such as shown below appears. (Screen details may differ depending on the
user logged in.)
New button
Updates the screen to the latest information.
Menu
(The menu may differ depending on the user logged in. The following menu appears when logged in as
an administrator.)
Lets you select one of the following screens.
Administrator Menu
Special User Menu
General User Menu
2
Screen Display and Operation
A
Tenant list
Shows the indoor unit and tenant structure currently accessed by the Intelligent Controller in a list.
Select indoor units by clicking different parts of the list.
Clicking on the part highlighted in the screen example above will select the individual indoor unit, while
clicking on the tenant name (Tenant001, Tenant002, etc. in the example) will select all indoor units for
that tenant. Clicking on the top of the list (Tenant in the example) will select all indoor units of the site.
Only the tenants that can be operated by the user permission used to log in (administrator, special,
general) are displayed.
Icon display area
Shows icons for indoor units connected to the Intelligent Controller.
Clicking on an icon whose frame is shown in reverse will select that unit. Clicking on a tenant name will
select that tenant.
If an Interface Adaptor is used, the icon display becomes light purple during the ON operation.
Notification column
Shows information about the connection status of web browser and Intelligent Controller, etc.
Alarm code display
Shows the alarm code as a tooltip when the cursor is moved over the icon of the indoor unit for which
the alarm is occurring.
Site name
The "Site name" set in the Intelligent Controller appears.
Remote control window
Shows the Remote control window. When this window has been closed, clicking on the indoor unit or
making another selection will bring it up again.
D C B
A Status/Control screen section
Shows the status of the indoor unit and the operation
condition.
When a control operation is performed, the background
color of the respective field changes and the Send button
becomes available. Clicking the Send button will send all
operation steps performed up to this point to the Intelligent
Controller. If you instead click the
perform a step such as selecting another indoor unit,
operation steps performed up to this point will be canceled.
E
Remote control window
3
Screen Display and Operation
Cancel button or