Printing; Preparation; Connection; Restrictions - Panasonic CZ-256ESMC2 Operation Manual

9 Printing

Printing using the Intelligent Controller is as stated below.

9.1 Preparation

Printing is ready only by connecting a USB cable to the unit' s USB port. Purchase the cable shown
below (an example) separately.
Example) ELECOM USB2-20 (2 m) or equivalent.
Internal wiring connection (reference)

9.2 Connection

Connect the printer with the Intelligent Controller using a USB cable.
Intelligent Controller
Connect the cable to the "USB" connector located on the controller's back.
82
Printer
USB
Used when connecting a
dedicated printer (to be
locally procured).

9 Printing

9.3 Restrictions

(1) The Intelligent Controller is adaptable to printers of the "PCL" standards, among which we have
made sure that the following two are fully adaptable:
Laser printer 1720 from Dell Inc.
Ink jet printer Of cejet Pro K5400 from Hewlett-Packard Co.
(2) Some printers need to have the Intelligent Controller powered on prior to connecting the printer
cable or re-power the printer.
(3) Printers can be connected only to the USB port.
(4) Only A4-size paper in vertical position can be printed.
(5) Printing is available only in monochrome. Color printing is unavailable.
(6) Printing provides hardcopies (just as displayed in the screen).
(7) Refer to the operation manual for the printer for the printer-side settings, displays, and measures
to counter failures.
(8) The following alarm dialogue will be shown when pressing Print in the events of:
- The printer is not connected to the system.
- The printer is not powered on.
- The printer is off-line.
83