Mail Send Log Screen - Panasonic CZ-256ESMC2 Operation Manual

[O/D comm. error log] logs the history of errors in communication between the outdoor unit and the
Intelligent Controller or the Communication Adaptor.
[Adapter alarm log] logs the history of warnings as determined by the Intelligent Controller or the
Communication Adaptor.
(Duplicate adaptor addresses, communication error between the Intelligent Controller and adaptor, etc.)
8
Screen Display and Operation

3-6. Mail Send Log Screen

When you use the menu to select [4. Maintenance/Test Run : 4. Sent mail log] while logged in as an
administrator, a screen such as shown below appears.
No.
The entry numbers for the sent mail log. With a maximum of 20 (No. 1 to 20) possible entries, the
newest entries appear at the top of the list. When the number of entries exceeds 20, entries are
deleted starting with the oldest.
As up to three mail recipients can be specified, up to three log entries can be recorded for one alarm
occurrence.
Rslt
"OK" appears when an alarm mail is sent properly, and "NG" appears when sending fails.
Send T.
The date and time the alarm mail was sent (or sending was attempted).
To
The recipient address the alarm mail was sent to. If the address is too long, only part of the address
may appear.
Unit name
The name of the indoor unit for which the alarm occurred.
Alarm code
The code for the alarm that occurred.
Stat
"Occurrence" appears when a notification of an alarm occurrence is sent, and "Restoration" appears
when a notification of an alarm restoration is sent.
Address
The address of the indoor unit for which the alarm occurred.
The address follows the format, "adaptor number - link number - system (outdoor) number - indoor
number".
When a test mail is sent, "TEST_MAIL" appears.
9
Screen Display and Operation