6 Using the System
6.7.2 Checking the alarm logs
Use this screen to check logs of up to the past 14 alarms and errors for individual indoor units.
Procedure
Select 4.Maintenance/Test Run in the main menu and 2.Alarm log in the sub menu.
1 Select the tenant to display.
2 Select the indoor unit to display.
1.Status/Control
2.Total data/Cut-off
3.Distrib. ratio/Usage
4.Maintenance/Test Run
1.Inspection sign
5.Initial settings
2.Alarm log
6.Auxiliary settings
3.Test run
1
2
3 Touch the Del this unit button to delete the alarm logs of the selected unit only, or touch the
Del all units button to delete the alarm logs of all units.
When a window like the following appears, touch the Yes button.
50
4
2
4
2
6 Using the System
Main
Sub
4 Select "I/D alarm log", "O/D comm. error log", or "Adapter alarm log".
[O/D comm. error log] logs the history of errors in communication between the outdoor unit and
the Intelligent Controller or the communication adaptor.
[Adapter alarm log] logs the history of warnings as determined by the Intelligent Controller or the
communication adaptor.
(Duplicate adaptor addresses, communication error between the Intelligent Controller and adaptor, etc.)
3
4
4
2
4
2
Main
Sub
4
51