Advanced Screen; Security Screen; Table 3-2 Advanced Screen Parameters - Silicon Graphics Zx10 User Manual

3: BIOS Setup

Advanced Screen

Security Screen

46
The Advanced screen lets you configure system devices..
Table 3-2 Advanced Screen Parameters
Parameter
Processor Serial Number
Installed O/S
Reset Configuration Data
Extended Memory Test
PCI Configuration
I/O Device Configuration
The Security screen lets you control access to BIOS Setup and to the system.
Description
Controls detection of the processor serial number. By default, this
parameter is Enabled.
Sets the operating system most commonly used on the system. By
default, this parameter is Other.
Controls whether the Extended System Configuration Data (ESCD)
area is cleared. By default, this parameter is No.
Controls whether extended memory is tested during power-on self
test (POST).
Controls configuration of installed Peripheral Component
Interconnect (PCI) devices.
Submenus let you enable, disable, and configure the integrated
controllers – SCSI, network, Universal Serial Bus (USB), and audio.
Submenus let you enable or disable PCI bus mastering and change
the configuration of each PCI socket.
Submenus let you configure operation of a system with installed
Accelerated Graphics Port (AGP), Peripheral Component
Interconnect (PCI), and Industry Standard Architecture (ISA)
devices. You can enable an ISA graphics device to access PCI
graphics palette data (default is No), reserve upper memory for ISA
devices, and reserve IRQs for use by ISA devices. If your system
has dual monitors, you can select which video controller is the boot
display device (used for VGA display).
Controls configuration of the input/output (I/O) ports. You can
configure the serial ports, the parallel port, and the floppy disk
controller as needed.
007-4330-002