Reduced Power Function - Martin MAC 2000 Performance User Manual

You may need to install a cord cap that fits your supply on the power cable. A 3-prong grounding-type plug must be
installed following the manufacturer's instructions. The table shows some possible pin identification schemes; if the
pins are not clearly identified, or if you have any doubts about proper installation, consult a qualified electrician.
To apply power, set the power switch on the base to the "I" position.

Reduced power function

The MAC 2000 Performance has an automatic power reduction function, which reduces the consumption to 700W if
the shutter/dimmer is closed for more than 3 minutes. This not only increases the lamp life, but also further decreases
the overall noise emission of the fixture.
Wire Color Pin
brown live
blue neutral
yellow/green ground
Table 2: Cord cap connections
Symbol
L
N
AC power
Screw (US)
yellow or brass
silver
green
11