Martin MAC 2000 Performance User Manual page 21

O R I E N T A T I O N
Coated gobos are inserted with the coating against the rim of the holder (away from the spring). Textured gobos are
inserted with the smooth side against the spring. This provides the best results when combining rotating gobos..
When an object is held up to the coated side
there is no space between the object and its
reflection. The back edge of the gobo cannot
be seen when looking through the coated
side.
T O R E P L A C E R O T A T I N G G O B O S
Important! The gobo can fall out if the spring is inserted backwards.
1 Disconnect the fixture from power and allow it to cool.
2 Lock the head in the top side up position and remove the top cover. Turn the gobo wheels as required to
access the desired position. Pull the gobo holder away from the wheel slightly to release. Remove the gobo
holder.
Coated side
Figure 14: Finding the coated side
Optical configuration
Uncoated side
When an object is held up to the uncoated
side there is a space between the object and
its reflection. The back edge of the gobo can
be seen when looking through the uncoated
side.
Tilt out and remove the gobo holder.
21