Horizon Fitness EX-22 Service Manual page 54

Fl ywheel/Drive Be lt Re p la ce me nt
(1 .2E, 2.2E, 3 .2E , 4.2 E)
Tools Required:
• Phillips Screwdriver
• 13mm, 14mm, 17mm Socket and Combination Wrenches
• 5mm Allen Wrench
• Crank Puller
Procedure:
1) Turn power on and press start on console.
2) Set resistance level to highest position and turn off console.
3) Unplug power supply from elliptical.
4) Remove crank disk and side covers. (Reference Crank Disk/Side Cover/Crank Arm Replacement
1.2E & 2.2E or 3.2E & 4.2E.)
5) For 1.2E, 3.2E, and 4.2E only - Remove tension cable from flywheel assembly.
54
Figure 66