Ped al Axle Set Re plac eme nt
(1. 2 E, 2.2E , 3.2E, 4.2 E)
Tools Required:
• Phillips Screwdriver
• 13mm, 14mm, 17mmm Socket and Combination Wrenches
• 4mm, 5mm Allen Wrenches
• Crank Puller
• Snap Ring Pliers
• Rubber Mallet
• Thread Lock
Procedure:
1) Remove crank disk and side covers. (Reference Crank Disk/Side Cover/Crank Arm Replacement
-1.2E & 2.2E or 3.2E & 4.2E.)
2) Remove the c-clip on the left-hand side of the pedal axle set.
3) Tap the pedal axle set from the frame, pounding on the left-hand side towards the right.
F i g u r e 6 4
52
PREASSEMBLED PEDAL AXLE SET
C-CLIP BEARING
AXLE
BEARING