F lyw hee l/D rive Belt Rep lac eme nt
(EX -22, EX - 33, EX-44, C SE 3 .5, CS E 4 . 5 , E G 5 )
Tools Required:
• Phillips Screwdriver
• 11mm, 13mm, 17mm, 19mm Socket and Combination Wrenches
• 4mm, 5mm Allen Wrenches
Procedure:
1) Turn power on and press start on console.
2) Set resistance level to highest position and turn off console.
3) Unplug power supply from elliptical.
4) Remove side covers. (Reference Side Cover Replacement for this section.)
5) Remove tension cable from flywheel assembly.
F i g ure 3 6
35