Te nsion Cabl e Rep lac eme nt
(1. 2 E)
Tools Required:
• Phillips Screwdriver
• 13mm, 14mm, 17mm Socket and Combination Wrenches
• 5mm Allen Wrench
• Needle Nose Pliers
• Crank Puller
Procedure:
1. Turn the tension knob to the highest resistance level.
2. Remove the bolt that attaches the tension knob to the console mast.
3. Remove the tension knob from the tension cable by pulling up on the tension knob.
F i g u r e 6 2
50