Advertisement
Tension C able Repla cement
( 1 . 2E ) Con tinue d
4. Remove crank disk and side covers. (Reference Crank Disk/Side Cover/Crank Arm Replacement
-1.2E & 2.2E.)
5. Disconnect the tension cable from the flywheel/brake assembly.
F i gur e 63
6. Disconnect the nut that attaches the tension cable to the main frame.
7. Fish the new tension cable through the console mast.
8. Make sure that the tension knob is still set to the highest resistance level and attach the tension
knob to the tension cable and secure to the console mast with screw.
9. Connect tension cable to the flywheel/brake assembly and adjust so that magnetic brake is posi-
tion properly. (Reference Adjusting the Magnetic Brake in Maintenance in section.)
10. Adjust the tension knob from the lowest to highest resistance settings to ensure proper movement
and position of the flywheel/brake assembly.
51
Hide quick links:
Advertisement
