Advertisement
P e dal A xle Set Rep laceme nt
( 1 . 2E , 2.2 E , 3. 2E, 4.2E) Conti nu e d
C-CLIP
4) Once the pedal axle set and the bearings are removed from the frame, make sure to remove all dirt
or grease from the frame bearing housing.
5) Insert new pedal axle set and bearings.
BEARING
Make sure there is thread lock applied to both the inner and outer diameters of the
bearings before installing. It is recommended to allow the thread lock to adhere for
24 hours before using the machine.
Figure 65
PREASSEMBLED PEDAL AXPLE SET
AXLE
BEARING
53
Hide quick links:
Advertisement
