Resistance Troub le sho ot in g Co nt in ue d
S y mp to m
Resistance is Too Hard or Too
Weak
24
P o s s ib le C a u se Te s t P r o ce d u r e
Tension cable is not connected
to tension knob. (1.2E Only)
Tension cable is not connected
to the brake or has failed.
Magnetic brake is positioned
improperly.
Remove tension knob from the
console mast. Verify that the
copper cable from the tension
knob is seated properly in the
keyhole located on the tension
knob.
Verify that the tension cable is
connected to the break or has
not failed.
Verify the correct position of
magnetic brake. (Reference
Adjusting the Magnetic Brake
in Maintenance section.)
R ep a i r
Reattach cable. (Reference
Tension Cable Replacement in
Parts Replacement section.)
Reattach cable. (Reference
Tension Cable Replacement
for 1.2E or Servomotor Re-
placement in Parts Replace-
ment section for all other
models.)
Reposition the magnetic brake.
(Reference Adjusting the Mag-
netic Brake in Maintenance
section.)