S ervo mot o r Voltage Che ck
( A l l M odel s Excep t 1.2 E)
1) For Models EX-22 - EX-44/CSE 3.5 & 4.5/EG5/2.2E Only – Remove plastic housing to access IC board pins.
2) Place the positive lead of your multi-meter on the top soldered pin on the backside of the IC board.
3) Place negative lead on the second soldered pin on the backside of the IC board.
EX-22 - EX-44/CSE 3.5 & 4.5/EG5/2.2E
F ig u r e 1 5
F i g u r e 1 6
1