Advertisement
Adj u sting the Magnetic Bra k e
(2 .2 E)
Tools Required:
• Phillips Screwdriver
• 12mm, 13mm, 14mm, 17mm Socket and Combination Wrenches
• 5mm Allen Wrench
• Crank Puller
Procedure:
1. Turn on unit and Press start.
2. Set resistance highest level and power off unit.
3. Remove crank disk and side covers. (Reference Crank Disk/Side Cover/Crank Arm Replacement in
Parts Replacement section.)
4. Adjust the nut on the magnetic brake spring clockwise to reduce the brake resistance and counter-
clockwise to increase the brake resistance.
5. It may be necessary to also adjust the top half of the magnetic brake. To do this, loosen the two
5mm bolts that attach the magnetic brake to the frame. Adjust the position of the magnetic brake closer or
further from the flywheel.
Fi gu r e 6
10
The correct position for the flywheel/brake assembly is 2-3mm from the flywheel at
the highest resistance level.
Hide quick links:
Advertisement
