Elite 1.2E 2.2E Rev.1.0.indd 2-3 IN TROD UCT ION CONGRATULATIONS and THANK YOU for your purchase of this Elite Series elliptical! Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, an Elite Series elliptical can help you attain it –...
• Unplug elliptical before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE) • This elliptical should not be used by persons weighing more than 250 pounds on the 1.2E and 275 pounds on the 2.2E. Failure to comply will void the warranty.
Page 4
������������������ c ����������������������������� c ��������������������������� c �������������� c ������������ c ��������������� c ������������������ c ����������������� ���������������������������������������������������������������������������������������������������������� �������������������������������������������������������������������������������������� Elite 1.2E 2.2E Rev.1.0.indd 6-7 ASSEMBLY STEP 1 ������� �������� ��������������� ���������������� ��������������� �������������� ���������� ��������������� HARDWARE BAG FOR STEP 1 CONTENTS : ��������...
E) Insert 3 BOLTS (C), 3 LOCK WASHERS (D) and 3 ARC WASHERS (E) into back of CONSOLE MAST. F) Attach CONSOLE MAST to MAIN FRAME using BOLT (B) and NUT (F). G) Slide CONSOLE MAST BOOT down to cover exposed bolts. Elite 1.2E 2.2E Rev.1.0.indd 8-9 ASSEMBLY STEP 4 HARDWARE BAG FOR STEP 3 CONTENTS : ��������...
Page 6
���������� ���������� ������ ���� ���������� ����� ������ Elite 1.2E 2.2E Rev.1.0.indd 10-11 ASSEMBLY STEP 7 A) Open HARDWARE BAG FOR STEP 6. B) To attach LOWER LINK ARM to PEDAL ARM, slide SPACER (J), FLAT WASHER (K) and WAVY ������������...
Page 7
������������������������ c ������������������ c ����������������������� c ������������������ c �������������� c ����������� c ��������������� c ������������ ���������������������������������������������������������������������������������������������������������� �������������������������������������������������������������������������������������� Elite 1.2E 2.2E Rev.1.0.indd 12-13 ASSEMBLY STEP 1 ������� ��������������� �������� ���������������� ��������������� ��������������� ���������� ��������������� HARDWARE BAG FOR STEP 1 CONTENTS : ���������������...
Page 8
E) Insert 3 BOLTS (C), 3 LOCK WASHERS (D) and 3 ARC WASHERS (E) into back of CONSOLE MAST. F) Attach CONSOLE MAST to MAIN FRAME using BOLT (B) using NUT (F). G) Slide CONSOLE MAST BOOT down to cover exposed bolts. Elite 1.2E 2.2E Rev.1.0.indd 14-15 ASSEMBLY STEP 4 HARDWARE BAG FOR STEP 3 CONTENTS : ��������...
Page 9
D) Attach FOOTPAD BRACKET to FOOT PLATE using 3 BOLTS (M). E) Repeat on other side. HARDWARE BAG FOR STEP 6 CONTENTS : �������� ����� ������ ��������������� ������ Elite 1.2E 2.2E Rev.1.0.indd 16-17 ASSEMBLY STEP 7 �������� �������� ����������������� HARDWARE BAG FOR STEP 7 CONTENTS : ASSEMBLY STEP 8 ��������...
EL LIP TIC AL O PERATI ON POWER 1.2E: Your elliptical console is powered by a 2 AA Batteries (included). The batteries are located in a compartment on the underside of the console. 2.2E: Your programmable elliptical is powered by a power supply. The power cord must be plugged into the power jack, which is located in the front of the machine near the STABILIZER TUBE.
Page 11
Remember to gradually slow down your pace before stopping your workout. The machine will not stop moving if you stop your feet abruptly. After you have finished your workout, the console will ‘beep’ several times to let you know your workout is finished. Elite 1.2E 2.2E Rev.1.0.indd 20-21 2.2E CONSOLE DISPLAY �����...
2 . 2 E C O NS OL E OP E RATI O N Your Elliptical Trainer is powered by a power supply. The power supply must be plugged into the power jack, which is located in the front of the machine near the front stabilizer tube Q U I CK START Simply press the START key to begin working out.
If you cannot catch your breath, it’s time to slow down. Always be aware of these warning signs of overexertion. Elite 1.2E 2.2E Rev.1.0.indd 24-25 TARGET HEART RATE ZONE CHART...
Page 14
Extend your fingers towards your toes and hold for a count of 15 seconds. Make sure that you do not bounce while stretching. Sit upright again. Repeat one time. Elite 1.2E 2.2E Rev.1.0.indd 26-27 THE IMPORTANCE OF WARM UP & COOL DOWN ��� �...
T ROU B L E S H OOTI NG Your Horizon Fitness elliptical is designed to be reliable and maintenance free. However, if you do experience problems with your elliptical, please reference the troubleshooting guide listed below. PROBLEM: The console does not light up.
Clean with soap and water cleaners only. Never use solvents on plastic parts. Cleanliness of your elliptical and its operating environment will keep maintenance problems and service calls to a minimum. For this reason, Horizon Fitness recommends that the following preventive maintenance schedule be followed.
• Any attempt to repair this equipment creates a risk of injury. Horizon Fitness is not responsible or liable for any damage, loss or liability arising from any personal 2.2E:...
F a x : 6 0 8 . 8 4 2 . 1 6 6 0 Elite 1.2E, 2.2E Elliptical Rev. 1.0 2005 Horizon Fitness Products | Designed & Engineered in the U.S.A. | Made in China Elite 1.2E 2.2E Rev.1.0.indd 36...
Need help?
Do you have a question about the 1.2E and is the answer not in the manual?
Questions and answers