Sectors; Miscellaneous; Logs; Audio - Bosch AUTODOME 7000 VG5-7230 Operation Manual

106 en | Configuration via IP, Advanced Mode
8.
9.
To define a preposition tour:
1.
2.
3.
4.
5.
14.19

Sectors

Sector
The camera's pan capability is 360° and is divided into 16 equal sectors. This section allows
you to apply a title for each sector and to designate any sectors as a Blanked Sector.
To define a title for sectors:
1.
2.
3.
14.20

Miscellaneous

Fast address
This parameter allows the appropriate camera to be operated via the numerical address in the
control system. Enter a number between 0000 and 9999, inclusive, to identify the camera.
Note: This is required for identifying cameras connected through a decoder such as the
VIDEOJET decoder 3000 (VJD-3000).
14.21

Logs

To save the log file information:
1.
2.
3.
4.
14.22

Audio

You can set the gain of the audio signals to suit your specific requirements. The current video
image is shown in the small window next to the slide controls to help you check the audio
source and improve assignments. Your changes are effective immediately.
2014.04 | 2.0 | F.01U.283.679
Click the scene in the Preposition list you want to overwrite.
Click the Overwrite scene button to apply the new scene to the existing preposition.
To change the name of the scene, double-click the scene in the list. Then, change the
name in the Edit Scene dialog box and click OK.
To view a scene in the preview window, select the scene in the list and click the Show
scene button.
To view a scene from the LIVE page:
Click a scene number below the PTZ controls on the View Control tab.
OR
Use the keypad and the Show Shot button on the Aux Control tab.
Create the individual scenes.
By default, all scenes in the Preposition list are in the preposition tour.
To remove a scene from the tour, select the scene in the list and uncheck the Include in
standard tour box.
Select a dwell time from the Standard preposition tour drop-down list.
To start the preposition tour:
Return to the LIVE page.
Click the Aux Control tab.
Type 8 in the input box and click the Aux On button.
To stop the tour, type 8 and click the Aux Off button.
Place the cursor in the input box to the right of the sector number.
Type a title for the sector, up to 20 characters long.
To blank the sector, click the check box to the right of the sector title.
Click Download to obtain the log information.
Click Save.
Navigate to the directory in which you want to store the log information.
Type a name for the log file and click Save.
Operation Manual
AUTODOME 7000
Bosch Security Systems, Inc.