Encoder Profile - Bosch AUTODOME 7000 VG5-7230 Operation Manual

96 en | Configuration via IP, Advanced Mode
14.12

Encoder Profile

Figure 15.1: Advanced Mode>Camera>Encoder Profile>Profile 1 [HD models only]
For the video signal encoding, you can select a code algorithm and you can change the presets
for the profiles.
You can adapt the video data transmission to the operating environment (for example network
structure, bandwidth, data load). To this end, the camera simultaneously generates two data
streams (Dual Streaming), which compression settings you can select individually, for example
one setting for transmissions to the Internet and one for LAN connections.
Pre-programmed profiles are available, each giving priority to different perspectives.
You can change individual parameter values of a profile and you can also change the name.
You can switch between profiles by clicking the appropriate tabs.
Caution!
The profiles are rather complex. They include a large number of parameters that interact with
!
one another, so it is generally best to use the default profiles.
Change the profiles only once you are fully familiar with all the configuration options.
2014.04 | 2.0 | F.01U.283.679 Operation Manual
AUTODOME 7000
Bosch Security Systems, Inc.