Table of Contents
Advertisement
AUTODOME IP 4000i
1.4
Connection in applications
24 VAC power source: This unit is intended to operate with a limited power source. The unit
is intended to operate at 24 VAC (if PoE+ is not available). User supplied wiring must be in
compliance with electrical codes (Class 2 power levels).
PoE: Use only approved PoE+ devices. Power-over-Ethernet can be connected at the same
time as a 24 VAC power supply.
If auxiliary power (24 VAC) and PoE+ are applied simultaneously, the camera selects auxiliary
input and shuts off PoE+.
Bosch Security Systems
Installation Manual
Safety | en
5
2020-05 | 2.0 |
Advertisement
Table of Contents
Need help?
Do you have a question about the NDP-45A2-Z12C and is the answer not in the manual?