Main Bezel - IBM 21Y Maintenance Manual

1
Nameplate
2
Bezel assembly
To remove the nameplate, do the following:
1. Power-off the server, if it is on.
2. Unplug the server.
3. Remove the side cover (see "Removing the side cover"
on page 44).
4. Remove the bezel assembly (see "Bezel assembly" on
page 114).
5. Press the release latch toward the guide tabs and gen-
tly press until the nameplate lifts off.

Main bezel

Before you begin:
• Read "Safety information" on page 155.
• Review the information in "Before you begin" on page
43.
FRU information (service only)
115