IBM 21Y Maintenance Manual page 39

Table 5. UNIX LLI driver messages for the Ethernet
controller
pnt0-19 IRQ found for PCnet hardware does not
match space.c (or pnt.conf)!
Explanation: This is a warning message
referring to the interrupt request (IRQ) that the
SunSoft Solaris driver found in the system.
Action: Ignore this message if you are sure
that this is what you want to do. Otherwise, run
the NETCONFIG program to match the
hardware settings
pnt0-20 add_intr_handler failed! Unknown interrupt
type.
Explanation: The interrupt request (IRQ) that
was specified, or the IRQ that was found,
conflicts with other devices in the server.
Action:
pnt0-21 add_intr_handler failed! Out of range
interrupt number.
Explanation: The interrupt request (IRQ) that
was specified, or the IRQ that was found,
conflicts with other devices in the server.
Action:
pnt0-22 add_intr_handler failed! Out of range IPL.
Explanation: The interrupt request (IRQ) that
was specified, or the IRQ that was found,
conflicts with other devices in the server.
Action: Modify the hardware settings. Run
the NETCONFIG program to search for
another Ethernet controller.
pnt0-23 add_intr_handler failed! Vector already
occupied.
Explanation: The interrupt request (IRQ) that
was specified, or the IRQ that was found,
conflicts with other devices in the server.
Action: Modify the hardware settings.
30
Netfinity 3500-M20 – Type 8657 Models 21Y, 22Y, 31Y, 32Y,
• Modify the hardware settings.
• Run the NETCONFIG program to search
for another Ethernet controller.
• Modify the hardware settings.
• Run the NETCONFIG program to search
for another Ethernet controller.