Bosch Solution 16plus Quick Start Manual page 29

Devices > Keypads >
Beeper Options
1 Trouble Alert Beeps
2 Entry Warning
3
Exit Warning
4
Chime Tone
5 Display Temperature
6 PIN Arming Not Allowed
7 Intaller PIN Not Allowed
8
Show Alarm When Armed
Use Keys [] and [] to scroll up and down the option list. With option
selected press ON / OFF key to enable or disable option. [] will display
to indicate option set. Press [OK] To Save when finished.
Devices > Keypads >
Emergency Keys
1
Audible Keypad Fire
2 Report Keypad Fire
3 Audible Keypad Medical
4 Report Keypad Medical
5
Audible Keypad Panic (Invisible If Not Set)
6
Report Keypad Panic
7 Reserved
8 Reserved
Use Keys [] and [] to scroll up and down the option list. With option
selected press ON / OFF key to enable or disable option. [] will display
to indicate option set. Press [OK] To Save when finished.
Devices > Keypads >
Access Group
Use Keys [] and [] keys or enter 1 - 8 + [OK] To Assign The Keypad
To An Access Group.
Devices > Keypads >
Lockout Time
Enter 0 – 255 + [OK] To Program The Keypad Lockout Time In
Seconds. 0 = No Lockout
(*** System Wide Parameter ***)
Devices > RF Devices >
Receiver Options
1
Display RF Receiver Trouble
2
Alarm On RF Receiver Tamper
3 Report RF Receiver Tamper
4 Alarm On RF Receiver Jam Detect
5
Report RF Receiver Jam Detect
6
Alarm On RF Receiver Comms Fail
7 Report RF Receiver Comms Fail
8 Reserved
Use Keys [] and [] to scroll up and down the option list. With option
selected press ON / OFF key to enable or disable option. [] will display
to indicate option set. Press [OK] To Save when finished.
Bosch Security Systems 09/06 BLCC100R
Device > RF Devices >
MENU 6-1-5
Supervision Time
Y
Y
Y
Enter the RF Supervision Time for Devices in Hours (001 - 255 Hours)
000 = No Supervision
Y
N
Device > RF Devices >
N
RF Device Options
N
1
Display RF Tamper
N
2
Report RF Tamper
3 Report RF Low Battery
4 Report Lost RF Device
5 Open Zone On Lost RF
6
Audible Keyfob Panic
MENU 6-1-6
7
Report Keyfob Panic
Y
8 Keyfob Function 1 Key = Part On
Y
Use Keys [] and [] to scroll up and down the option list. With option
Y
selected press ON / OFF key to enable or disable option. [] will display
to indicate option set. Press [OK] To Save when finished.
Y
Y
Devices > RF Devices >
Y
Add RF Keypad
N
N
Delete RF Keypad
View RF Device ID
Devices > Serial Device >
MENU 6-1-7
Device Type
0
0 = Disabled
1 = Serial Printer
2 = Computer
Use Keys [] and [] keys or enter 0 – 2 + [OK] To Program The Type
Of Serial Device Connected To The Serial Port.
MENU 6-1-8
0 6 0
Devices > Serial Device >
SECONDS
Baud Rate
0 = No Device Connected
1 = 300 Baud
2 = 600 Baud
3 = 1200 Baud
MENU 6-2-0
4 = 2400 Baud
Y
Use Keys [] and [] keys or enter Digits 0 – 6 To Program The Serial
Y
Device Baud Rate, Then Press [OK] To Save.
Y
N
Devices > Serial Device >
N
Flow Control
Y
Y
0 = No Handshaking
N 1 = Hardware
2 = Xon-Xoff
Use Keys [] and [] keys or enter Digits 0 – 2 To Program The Serial
Device Flow Control, Then Press [OK] To Save.
Solution 16 Quick Start Guide
plus
MENU 6-2-1
0 2
HOURS
MENU 6-2-2
MENU 6-2-3
MENU 6-2-4
MENU 6-2-5
MENU 6-3-0
MENU 6-3-1
5 = 9600 Baud
6 = 19200 Baud
MENU 6-3-2
4
Y
Y
Y
Y
N
Y
Y
Y
0
0
0
29